The Coming World of 3D Printing

3dcubeWithin a decade or two, 3D printers may do for physical objects what digitization did for books, movies, and music.  Another phase of the revolution is coming, with the digital world moving more into the physical.  Along one front there’s the Internet of Things, as physical objects become “smart” and linked to the Internet.  At the other front there’s digital home printing of physical 3D objects, from jewelry to replacement parts, and even candy sculptures.

3D printers are starting to get some mainstream media attention, including an appearance on the Colbert Report and a recent ABC News article. Like computers before them, they’ve already broken out of the business world and are moving into the consumer market.  I’d say we’re now moving past the early Altair phase and about to enter the Apple II explosion.  MakerBot is on their 3rd generation with their new Replicator.  Meanwhile the competition for the home market is heating up, with competitors like the Cube and the larger, but still rather pricey 3D Touch.  Meanwhile the iModela takes a different approach.  It’s a desktop CNC milling machine rather than an additive printer.   Except for the 3D Touch, the prices aren’t that far away from the $1298 that the original Apple II would have set you back when it was introduced, WITHOUT adjusting for inflation.

Make no mistake, this won’t be a passing fad.  Like a lot of technology, it may take a bit longer to get established than the hype would suggest, but its going to happen.  Stories are often a much better way to make a point than facts and figures, and thanks to Cory Doctorow’s ability to write and willingness to release his material under a Creative Commons license, there’s a great 1-page story on the disruption these things are going to cause (there’s also an audio version):

Printcrime by Cory Doctorow

(Originally published in Nature Magazine, January 2006)

The coppers smashed my father’s printer when I was eight. I remember the hot, cling-film-in-a-microwave smell of it, and Da’s look of ferocious concentration as he filled it with fresh goop, and the warm, fresh-baked feel of the objects that came out of it.

The coppers came through the door with truncheons swinging, one of them reciting the terms of the warrant through a bullhorn. One of Da’s customers had shopped him. The ipolice paid in high-grade pharmaceuticals — performance enhancers, memory supplements, metabolic boosters. The kind of thing that cost a fortune over the counter; the kind of thing you could print at home, if you didn’t mind the risk of having your kitchen filled with a sudden crush of big, beefy bodies, hard truncheons whistling through the air, smashing anyone and anything that got in the way.

They destroyed grandma’s trunk, the one she’d brought from the old country. They smashed our little refrigerator and the purifier unit over the window. My tweetybird escaped death by hiding in a corner of his cage as a big, booted foot crushed most of it into a sad tangle of printer-wire.

Da. What they did to him. When he was done, he looked like he’d been brawling with an entire rugby side. They brought him out the door and let the newsies get a good look at him as they tossed him in the car, while a spokesman told the world that my Da’s organized-crime bootlegging operation had been responsible for at least twenty million in contraband, and that my Da, the desperate villain, had resisted arrest.

I saw it all from my phone, in the remains of the sitting room, watching it on the screen and wondering how, just *how* anyone could look at our little flat and our terrible, manky estate and mistake it for the home of an organized crime kingpin. They took the printer away, of course, and displayed it like a trophy for the newsies. Its little shrine in the kitchenette seemed horribly empty. When I roused myself and picked up the flat and rescued my peeping poor tweetybird, I put a blender there. It was made out of printed parts, so it would only last a month before I’d need to print new bearings and other moving parts. Back then, I could take apart and reassemble anything that could be printed.

By the time I turned eighteen, they were ready to let Da out of prison. I’d visited him three times — on my tenth birthday, on his fiftieth, and when Ma died. It had been two years since I’d last seen him and he was in bad shape. A prison fight had left him with a limp, and he looked over his shoulder so often it was like he had a tic. I was embarrassed when the minicab dropped us off in front of the estate, and tried to keep my distance from this ruined, limping skeleton as we went inside and up the stairs.

“Lanie,” he said, as he sat me down. “You’re a smart girl, I know that. Trig. You wouldn’t know where your old Da could get a printer and some goop?”

I squeezed my hands into fists so tight my fingernails cut into my palms. I closed my eyes. “You’ve been in prison for ten years, Da. Ten. Years. You’re going to risk another ten years to print out more blenders and pharma, more laptops and designer hats?”

He grinned. “I’m not stupid, Lanie. I’ve learned my lesson. There’s no hat or laptop that’s worth going to jail for. I’m not going to print none of that rubbish, never again.” He had a cup of tea, and he drank it now like it was whisky, a sip and then a long, satisfied exhalation. He closed his eyes and leaned back in his chair.

“Come here, Lanie, let me whisper in your ear. Let me tell you the thing that I decided while I spent ten years in lockup. Come here and listen to your stupid Da.”

I felt a guilty pang about ticking him off. He was off his rocker, that much was clear. God knew what he went through in prison. “What, Da?” I said, leaning in close.

“Lanie, I’m going to print more printers. Lots more printers. One for everyone. That’s worth going to jail for. That’s worth anything.”

Creative Commons License Deed

Attribution-NonCommercial-ShareAlike 2.5

You are free:

* to Share — to copy, distribute, display, and perform the work
* to Remix — to make derivative works

Under the following conditions:

* Attribution. You must attribute the work in the manner specified by the author or licensor.

* Noncommercial. You may not use this work for commercial purposes.

* Share Alike. If you alter, transform, or build upon this work, you may distribute the resulting work only under a license identical to this one.

* For any reuse or distribution, you must make clear to others the license terms of this work.

* Any of these conditions can be waived if you get permission from the copyright holder.

Disclaimer: Your fair use and other rights are in no way affected by the above.

This is a human-readable summary of the Legal Code (the full license)

3 thoughts on “The Coming World of 3D Printing

  1. 3d printing is definitely awesome. However, I believe that the consumer side of things have slowed down (Especially with the recent selling of https://pinshape.com/3d-marketplace). Good news is that the commercial aspect of this industry (Nasa, Google, etc) is sky rocketing. Now there are multiple applications and even the commercial printers are on a whole another level. We are not just limited by filaments anymore. I believe the folks at Formlabs just came with a ‘tough’ resin ( http://formlabs.com/support/materials/using-tough-resin/ ) that is used my MAJOR construction and engineering companies. The future looks bright for 3d printing but it just hasn’t reached the mainstream just yet. At least in my opinion.

Leave a Reply to Eric LeClair Cancel reply

Your email address will not be published. Required fields are marked *

The maximum upload file size: 512 MB. You can upload: image, audio, video, document, spreadsheet, text. Links to YouTube, Facebook, Twitter and other services inserted in the comment text will be automatically embedded. Drop files here